Sophie Tankini

SOPHIE TANKINI : : MY TIPS AND TRIBULATIONS : : CLOSET CASE FILES

Well hiya everyone.

As most of you know, one of my versions of the Sophie Swimsuit is a tankini. I’ve written this post for those of you that have expressed an interest in making your own tankini. Hopefully, it will help you out, if even just a little. See…the thing is…I’m not 100% happy with my second Sophie Tankini. It’s not a complete fail; I went for a swim yesterday and it was comfortable enough…but..I just haven’t managed to get the fit quite right. Hence, my reluctance to label this post as a DIY or a tutorial….or anything else that even remotely alludes to me having any sewing skillz whatsoevah.  It’s, at best, a dialog explaining my process. And….obviously…my process isn’t perfected or I’d be singing a happier tune.

My goal has been to make a sleek, fitted tankini…a silhouette much like the one piece. Unfortunately, it isn’t as simple as cutting off the one piece at the hipline and sewing a hem. The pattern, like most swimsuit patterns, is designed specifically for four-way stretch fabric. When you wear the one piece suit, the fabric stretches in all directions. It stretches around your body horizontally and it also stretches lengthwise from top to bottom. When you cut off the bottom of the suit, the fabric no longer has the resistance required for it to stretch from top to bottom. Am I making sense? It will still stretch around your body but without that four-way stretch, the hemline will be ride up above your waistline in a wrinkly mess…not the sleek look I’m going for…

{A staged mock up of….not the sleek look I’m going for…}

The solution trick is to add width to your pattern. How much is the right amount, you ask? Eep…I’m sorry….I don’t have the definitive answer. It really will depend on your body and your fabric. Having said that…I will be sharing the formula I used.

Tip: The flouncier you like your tankinis, the easier it will be. A fitted tankini with the seam lines matching….more challenging.

1.   The first step is to trace off front, side front, back and side back pieces. It’s at this stage that I determined how long I wanted my tankini. I drew a hemline beginning at the side seams and about 1″ from the bottom of the one piece side back and side front pattern pieces.

2.   I then slashed the pattern pieces being mindful not to distort the cup shape. I was also careful not to slash the back pieces above the point where I attached the wings. Each of my revised pattern pieces are 20% wider as measured at the bottom hemline. In addition, on this make, I added 1/4″ to my side seams in the midriff area. And this I didn’t do, but highly suggest….make your seam allowances wider than 3/8″…this will give you some valuable wiggle room when it comes to fitting your tankini.

3.   The finished pattern pieces…retraced just for you. You can see I opted for a slightly hi/low hemline.

Tip: If you want the side front and side back seams of your tankini to line up with the seam lines on your bottoms…advisable if you are using two different fabrics…then I recommend that you complete your swimsuit bottoms first.  Then you can baste the side front/side back tankini seams and try on your suit, making adjustments as necessary.

 

 

4.   My hems are sewn with a twin needle and woolly nylon thread in the bobbin.

5.   Cut 3/8″ wide strips of fusible knit interfacing.

6.   Working on the wrong side of the fabric, fuse strips of interfacing to the bottom hem of your tankini. Note: lycra and heat…not really intended for each other. Be sure to test a sample if you use this method. I do not use my steam setting to apply the interfacing. I lay a damp press cloth over top of the interfacing and use a dry iron set on medium-high heat.

7.   After applying interfacing, I edge finished with my serger, which is entirely optional, then folded the hem 3/8″ and topstitched with a twin needle.

8.    Okay….my finished tankini with a pretty good seam line match on the left butt.
9.    The front seams lined up okay….it’s a little off on the left. But the overall fit is pretty sleek, very little wrinkling on the front.
10.  Oops…the right backside doesn’t line up, but this isn’t where my dissatisfaction lies….
Yep….still not happy with the fit at my waist area on the back. Even though I added to the side seams on my latest make…far right…it’s wrinkly.
11.  First up….my one piece…my favourite thus far. A nice smooth silhouette…that four-way stretch in action.
12.  My first Sophie Tankini…a little wrinkly around the midriff at the back, but something I was confident I could improve on.

13.  The swimsuit I just finished and photographed for this post. Even with adding to the side seams, it appears wrinkly….actually more wrinkly than my pink tankini….so….um….yeah…I dunno. The fabrications are quite different in weight and I can only imagine that is part of the equation.

* * *

So….to sum up…I hope these tips are of help to you. As you can see, there is a degree of experimentation that is required. I think I will add 25% to my pattern pieces on my next make and 5/8″ wide seam allowances…just to be sure I’ve given myself enough room to really master the fit.

And between you and me…..I think I might just give the two piece a go…gasp. The bottoms are supremely comfortable and have a very high rise. It would just be the tiniest bit of midriff showing…Never say never, amirite? Hope you’re all enjoying summer!

My DIY Sophie Swimsuit Mashup : : here
My Sophie Swimsuit Post : : here

30 Comments

  • Reply Louisa July 22, 2016 at 8:29 pm

    Thanks, Sue! Very helpful. One day. When I get around to it. Hope you make the two-piece! I'm sure it will be very cute on you.

  • Reply dalachin July 23, 2016 at 8:24 am

    I have the same thought… I was thinking about giving the two piece a go, and I don't do bikinis! But I'm also thinking about trying your modified one piece with a band. For the tankini, maybe add width in the hips, the wrinkles might be caused by the suit getting hung up there.

  • Reply Hana Velvet Ribbon July 23, 2016 at 8:34 am

    Very clear explanation! Thank you for sharing with us. Hope one day I will make tankini 🙂

    • Reply Sue @ A Colourful Canvas July 24, 2016 at 2:50 pm

      My pleasure to share Hana. I'm sure when, or if, you do make a tankini it will be very cute.

  • Reply Sharon July 23, 2016 at 2:22 pm

    Thank you for the clear and well explained process,

  • Reply No Fear of Fashion July 24, 2016 at 12:26 am

    What a lot of work, what a skills you have (yes you do). And in spite of the nice tankinis my favourite is also 11, the swimsuit.
    After all this explanation I am sure I will never make one myself. Just kidding, I already knew that 40 years ago haha.
    Greetje

  • Reply Patti July 24, 2016 at 4:55 am

    Thanks for this Sue! You are so, so talented. And just like Greetje, I know I will never attempt – but I admire! xox

    Patti
    http://notdeadyetstyle.com

    • Reply Sue @ A Colourful Canvas July 24, 2016 at 2:52 pm

      LOL…you two, double trouble I say…..now to one day get myself to your Florida beaches.

  • Reply Flo July 24, 2016 at 5:34 am

    A lot of interesting points here, things that I wouldn't have thought about. I do like the idea of cutting it large with the 5/8″ seam allowances, gives you plenty of room to tailor it. You can always take it in, but once you cut, you can't put it back!

    I say go for it on the 2 piece!

  • Reply Heather Gibson July 24, 2016 at 10:54 am

    I think you could totally pull the two piece off. This tankini discussion is very interesting – I would have never thought about the effect of the 4 way stretchI think you are right that it takes some trial and error and is probably up to some personal preference too. I really need to get on this bathing suit making train. Tankini issues aside, I think all your suits look great!

    • Reply Sue @ A Colourful Canvas July 24, 2016 at 2:55 pm

      Thanks Heather. Yes, personal preference plays a strong factor. The ready made tankini I have just skims my body….and I like that.

  • Reply Sue @ A Colourful Canvas July 24, 2016 at 2:48 pm

    Yes….you be a busy gal with the road trip and all…

  • Reply Shirl July 24, 2016 at 3:31 pm

    Your talent never ceases to amaze me!

    Shirl

  • Reply the momma July 31, 2016 at 1:08 pm

    Is it possible that there is too much length there at the back creating those wrinkles? it kinda looks like if you just (haha – *just*… it's never that simple, is it?) took out a little wedge of fabric from the back bodice before attaching your strap modification (almost like a sway back adjustment) those wrinkles would disappear. maybe??
    Whatever you do next, I am quite certain that you will end up with a suit you are 100% pleased with before you're finished 🙂
    Tracy

    • Reply Sue @ A Colourful Canvas July 31, 2016 at 3:26 pm

      You know…that just might be the answer Tracy!!!! THANK YOU! Either at the top where I attach it to the wing, but possibly even at an invisible 'lengthen or shorten here' line a few inches below where I attach the wing! Brilliant! Thanks again!

  • Reply Carolyn August 1, 2016 at 5:21 am

    Those gorgeous cheerful, summer-tastic fabrics you have chosen; honestly these are my favourites of all the sophie swimsuits I've seen, ever. Including mine! LOVE!!!

    • Reply Sue @ A Colourful Canvas August 2, 2016 at 9:18 am

      Aw…thank you so much Carolyn! I have a piece of red/white/and blue fabric that is begging to be sewn up. I'm hoping the finished suit will look more classic!

  • Reply Rebecca August 5, 2016 at 9:01 pm

    I think you are so amazing! I can't imagine how much work it would take to make a tankini. So many things to take into account. Love your choice of pattern and colors. Even though you may not be 100% satisfied I think it looks fantastic.

    Rebecca
    http://www.winnipegstyle.ca/blog/

  • Reply pao August 14, 2016 at 7:28 am

    huh? I must be in post-doc. sewing school.

    Well, how many swim suits do you have now, Ms. Sue? Not that that's the point. That would be like asking someone how many dresses (or shoes) they have now. hrumph.

    • Reply Sue @ A Colourful Canvas August 14, 2016 at 9:48 am

      LOL…'nuf with all this ed-u-ca-shion stuff, amirite? After making my swimsuit mashup, the feedback was strongly in favour of tips and how-to's so it's done!

      Yes…how many dresses doth one have in one's Chicago wardrobe Pao? hehehe…I can confidently say I have too many bathing suits, so why do I have the urge to make 'just one more'?

  • Reply pao August 14, 2016 at 2:03 pm

    Because you just gotta get it pefect, I mean right. Right? Right.
    Now, can we see them all in a chorus girl like line up…

  • Reply Stefanie September 12, 2016 at 3:25 pm

    Thank you so much for your tips. I couldn’t manage to make my own swimwear but maybe next year with your helpful tips!

  • Reply Aliza Rudner August 23, 2018 at 3:33 pm

    For the tankini top – I made mine using a workout style tank top (a very old Simplicity pattern) . For the original, I just wore a bikini top underneath for bra-like support; my remake will have a built in bra (once I get over the fear of doing that, and actually make the thing). If you want to keep the cups of this swimsuit, but have a nice skimming fit through the torso, compare this tankini pattern to a good tank top pattern, and test out if that works better.

    • Reply Sue August 23, 2018 at 4:23 pm

      Now that’s a great idea. I’ve recently made the Kila Tank and I find it fits really well. You’re right…I could use that pattern for the torso part of the suit. That being said…I admit that I’m really fond of my one piece suits. 🙂 More so than the tankini versions. But…just thinking aloud here…I bet I would like a tankini better if I made it with a workout style tank top like you have done. I already have the Sewaholic top and that it has a built in shelf bra. Thanks for the suggestions!

    Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.